View Full-Size Image
|
Link 10 Cell Mounting Frame w/ 1 Pwr Sup 2RU, Modules ordered sep. |
| Mfr # DFR-8310 |
|
( Link Electronics )
|
| Price:
$ 794.95
|
|
|
|
The DFR-8310 is a 2RU modular frame, designed to accommodate up to 10 modules of the openGear 8200 Multi-Definition product family.
The DFR-8310 blends the simplicity of a fixed rear connector frame and the flexibility of independent rear modules.
For most applications which use BNC connectors, the DFR-8310 is available with a fixed 100-BNC rear I/O module. This frame configuration allows any openGear module using BNC connectors to be installed into any slot, without restrictions. Installation of separate rear modules is not required. Unused slots can be pre-wired into a facility, and installation of card modules can be done at any time without accessing the rear of the frame.
For applications where other types of I/O connections are necessary, the frame also supports slot-dependent rear I/O modules.
The DFR-8310 frame can accommodate two frontloaded PS-8300 power supplies. Although a single supply can fully power a loaded frame, the addition of a second (optional) supply gives the frame full power redundancy. Each supply is fed by a separate power cord, which is held in position to guard against accidental power loss.
Each power supply contains an independent cooling fan, status LED, and a front-mounted power switch. The frame comes standard with one power supply.
The frame has been designed with an advanced cooling architecture to increase ventilation. For applications where the total module load is less than 40 watts, the DFR-8310 can be used without cooling fans. Frames should be mounted with 1RU empty space between frames.
For applications where frames are mounted directly above or below other equipment, or where the total module power load is greater than 40 watts, an optional cooling fan kit can be added. These frontdoor mounted fans provide forced air cooling for all modules, and additional cooling for the power supplies. An intelligent fan controller adjusts fan speed with changes in frame power loading or temperature. Particular attention has been paid to frame acoustics in order to keep fan noise to a minimum.
The DFR-8310 will accommodate any openGear modules. Backed by a 5-year warranty, the DFR-8310 combines reliability, features and economy for future generations.
● 2RU frame houses up to 10 modules
● Analog or digital, video or audio in the same frame
● 2 looping reference inputs feed all modules
● 150W power supply with integral cooling fan
● Ethernet port for optional networked control
● Optional hot-swap redundant power supply
● Optional cooling fan module available
● 5 year warranty
|
|
