LYNX yellobrik: 1RU x 19” Rack Chassis for 14 modules

LYNX Technik 1RU 19" Rack Frame for yellobrik - yellobrik RFR 1000

Features:

•Compact 1 RU Design
•Standard 19" Rack mount
•Accommodates up to 14 yellobriks
•External 12VDC power inputs
•Primary and redundant power options
•Power failure alarm GPO outputs

Description

The RFR 1000 is a compact 1 RU high mounting frame designed for yellobriks. Up to 14 yellobriks can be vertically mounted and are mechanically clamped securely in place. Each slot has its own integrated power connector on a central power bus.

The rack has two external 12VDC inputs for power, one for primary power, the second for redundant backup. A optional external power brick (RPS 1000) is available which provides enough power for any combination of yellobriks. A second RPS 1000 Power SUpply can be used for redundant backup.

Primary and redundant power LED’s are located in the front panel as well as GPO connections for the power supply failure alarms.

While the frame will accommodate all yellobriks, it is ideally suited for the yellobrik fiber converters, which are typically used in larger numbers. Fiber connections are on the front and the SDI copper connection in the rear. A space is left open on one side to route the fiber loops from front to rear making for a very clean installation. The module fiber RX and TX activity LED’s can be seen clearly from the front with the modules installed.


Includes:

• Rack Frame
• Note. External 12V primary and redundant power supplies NOTincluded, Please use RPS 1000