Adder AV100P extender pair single TX, No DeSkew - ALAV100P-US
The AdderLink AV Series is a range of audiovisual extenders delivering high video resolutions and superb quality audio up to 300m/1000 feet using standard CATx cable (x=5,5e,6,7).
Designed for use in Digital Signage applications, the innovative design allows for flexible distribution that can grow in line with project developments and ensures direct delivery of crystal clear communication to consumers at the point of decision. The AdderLink AV Series avoids the prohibitive costs of fibre optic cabling, displays with built in CPUs or locating a CPU next to each screen.
The AdderLink AV Series consists of 4 interchangeable units
AdderLink AV Series features;
Extends video and audio across a single CATx cable Extra fine video quality at resolutions up to 1600 x 1200 at 200m and 1280 x 1024 at 300m High fidelity clickless digital audio (16bit, 44.1 kHz, stereo) Fine, independent sharpness and brightness control DDC support Integrated state of the art 300MHz DeSkew with 62ns full scale & 2ns granularity (AV101R only) Feed through / cascade port at transmitter Dual video and audio outputs at receiver Use stand alone or rack mount 16 modules across 3U Advanced spike suppression circuits for reliability in ‘noisy’ installations All metal construction Power / video indication confirm correct operation
1600 x 1280 at distances up to 200 meters/650 feet, 1280 x 1024 at distances up to 300 meters/1000 feet.
Up to 300 meters/1000 feet using CATx (x=5,5e,6,7).
Differential analogue signalling for video signals.
Finely adjustable cable equalisation amplifiers enable the video sharpness and brightness to be independently adjusted using the dials on the side of the receiver units.
The remote and local units are fitted with two indicators; red shows the presence of power into the module, green indicates the presence of a video input.
Transmitted as digital signals to ensure high fidelity and low noise levels. Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played.
Rack mount options
Both the local (computer-end) and remote (display-end) units may be rack mounted in the AdderLink AV Series rack mount chassis. The chassis enable 16 units to be mounted in 3U of 19-inch rack space. The units are rack mounted using the optional rack mount faceplate.
Physical (All AdderLink AV units)
Metal case (steel and stainless steel), 98mm x 95mm x 25mm.
All AdderLink AV units are powered by an external 5V DC, 2A power supply with IEC power cable connection. A country specific power cord is provided. Alternatively 4 units can be powered using a 4amp power supply and the Adder “Squid” cable.
All AdderLink AV units are fitted with spike suppression circuits.
Display Data Channel
DDC signalling is supported to enable the computer to communicate with the local monitor and thus configure its video card for optimal operation.
All AdderLink AV Series come with the necessary IEC style power supply and power cord, safety and installation leaflet, CD manual, stick on rubber feet. (Note: the rack panels are not included and need to be purchased separately as required).
ALAV - Series rack mount chassis (part code: ALAV-RMK-CHASSIS), rack mount plate for local/remote unit (part codes: ALAV-RMK-FACIA). Adder 4amp power supply and “squid” cable to power 4 ALAV units (part code ALAV-PDM-KIT).
FCC class A, CE marked.
Operating Voltage: 100-240VAC Power Frequency: 50-60Hz Usage: 5VDC at 500mA. Temperature Tolerance