- Video Distribution with 4 Outputs
- Adjustable Gain Amplification
- Input LOOP OUT Jack
- Video 1 Volt Signal Indicator
- 10 MHz Bandwidth, NTSC or PAL
- 1/3-Rack, High-Density Rack Mounting
The RU-VDA4 is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block terminals on the rear panel. The RU-VDA4 has two jacks in the input stage. One jack is for the input signal; the other is a loop through output of the source signal.The input stage is bridging. If 75 Ω termination of the input signal is required, the termination is plugged onto the LOOP OUT jack. Gain is user adjustable from the front panel. The GAIN potentiometer allows adjustment from -1 dB to +7 dB. | Input: | 1 kΩ bridging 75 Ω line | | Gain: | -1 dB to +7 dB (0.9 to 2.25 V p-p, adjustable) | | Outputs: | 1 LOOP OUT from input signal; 4 amplified outputs | | Output Level: | 1 V p-p into 75 Ω | | Frequency Response: | 10 Hz to 10 MHz (+/- 0.2 dB) | | Noise: | < -70 dB below (1 V p-p) | | Output Isolation: | > 40 dB | | Differential Gain: | 0.1% | | Differential Phase: | 0.1 degree (measured at 10% and 90 APL) | | Connector Type: | BNC, PHONO, or Type F | | Power Requirement: | GROUND-REFERENCED, 24 to 33 Vdc @ 60 mA | | Ambient Operating Environment: | 0° C to 55° C |
|
Products 
