| oweredUtilizes All Three Format-C Signal PairsActive Balanced Transmission Over Twisted Pairs The -TPS3C modules are three-pair audio/video sending modules compatible with RDL® Format-C twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio and video sources. The D- and DS- models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS3C features a white front-panel laminate with gray lettering that matches RDL Decora®-style remote controls. The DS-TPS3C is constructed of stainless steel to coordinate with RDL Decora®-style stainless steel remote controls in commercial/industrial installations. The AF-TPS3C is an APPFLEX™ series product that is compatible with various APPFLEX wall-mount, cabinet-mount and tabletop enclosures. The EM-TPS3C is a 45mm square module that fits the European Modular mounting frames and cover plates. European electrical boxes are not sufficiently deep to accommodate RJ45 jacks and plugs, therefore the EM- product connects to the twisted pair cable through a detachable terminal block. The -TPS3C modules feature an RCA phono NTSC or PAL video input and two RCA phono jack audio inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level audio signals. The buffered video source is routed to pair A. The buffered left and right line-level audio inputs are routed to cable pairs B and C. These modules drive all three Format-C cable pairs, so they are not equipped to receive inputs from other sender modules. The -TPS3C may not be connected together with any other sending modules. The -TPS3C may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS3C may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. RDL Format-C provides quality balanced video transmission over long distances, and features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatically fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products. | Inputs (3): | Video: 75 Ω; Audio (left and right): 10 kΩ Unbal. | | Input Connection: | Video: RCA Phono; Audio: RCA Phono | | Input Level: | Video: 1 V p-p; Audio: -10 dBV Unbalanced; +10 dBV Max | | Format-C Signal Pairs: | A (Video); B (Unbalanced Line Left); C (Unbalanced Line Right) | | Gain: | Video: Unity; Line: 12 dB | | Output: | RDL TP Format-C | | Output Connection: | RJ45 (Models D-, DS-, AF-); Detachable Terminal Block (Model EM-) | | Video Section | | | Video Format: | NTSC or PAL | | Video Bandwidth: | 10 MHz | | Audio Section | | | Frequency Response: | 20 Hz to 50 kHz (±0.5 dB) | | THD+N: | < 0.05% (20 Hz to 50 kHz); < 0.005% (1 kHz) | | Noise below +4 dBu: | < -95 dB | | Crosstalk: | Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz); | | Line to Video, Video to Line: | Below noise floor | | Headroom above +4 dBu: | > 18 dB | | Indicator: | Power In | | Power Connections (2): | Detachable terminal block; RJ45 | | Power Requirement: | 24 Vdc @ 65 mA plus connected loads | | Dimensions: | EM-TPS3C: 1.77†(45 mm) W and H; 1.93†(4.9 cm) D
D-, DS-TPS3C: 1.6†(4.06 cm) W; 4.11†(10.45 cm) H; 1.89†(4.8 cm) D
AF-TPS3C: 2.22†(5.64 cm) W; 2.77†(7.04 cm) H; 1.89†(4.8 cm) D | | Mounting Box Minimum Depth: | 2.4†(Models D-, DS-, AF-); 39 mm (Model EM- | | Ambient Operating Environment: | 0° C to 55° C |
|
Products