Datavideo TBC-100 Computer-based Time Base Corrector
Most video camcorders produce relatively unstable, synchronized signals. This can cause poor video image quality when capturing to your PC or recording to another deck. With the TBC-100 you can improve video signal quality and get clean video captures. The TBC-100 corrects the signal by replacing all sync signals from the video source with new signals.
This TBC resides inside the computer so it can draw power from the computer. It does NOT connect to the bus (power is drawn via an HDD-like power cable) and is OS independent.
1. 1. If you connect both S-Video and composite video sources to TBC-100, the card will automatically default to S-Video. For composite video, you can not plug in an S-Video input.
2. DC power input connector J601, use the enclosed "Pigtail" connector to connect the power source from PC power supply to TBC-100.
Pigtail Extension Connector (included)
Features
- Compatible with any S-Video or Composite video source
- Digital frame synchronization with full frame memory
- Re-generates all synchronization signals to stabilize the video
- Supports Line 21 closed Captioning
- Auto-Detect NTSC or PAL
- Wide bandwidth – 4.5MHz in Y/C and 3.5MHz in Composite
- 8-bit video resolution – 4:2:2 sampling rate
- Signal-to-noise ratio > 50dB
Connections:
Video
- Input: S-Video and Composite
- Output: S-Video and Composite
Includes:
- One 4 ft (1.2m) M/M S-Video cable
- One 4 in (10cm) M/M S-Video cable
- One 4 ft (1.2m) M/M BNC cable
- One 4 inch (10cm) M/M BNC cable
- One 7.8 inch (20cm) IDE power cable
|
Products