- Correct SPDIF Signal Level from Long Line
- Conversion Between SPDIF Connector Types
- BNC, Phono and Optical Inputs
- BNC, Phono and Optical Outputs
- Reshape SPDIF Waveforms
- Virtually Jitter-Free Performance
- Convenience of RDL® FLAT-PAKs™
The FP-SPR1 is the ideal product for applications requiring either conversion between SPDIF connector types or recovery of low SPDIF signal levels. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules. The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used. A coaxial input has priority over the optical input. Three output jacks are also provided: BNC, phono and optical. Either of the coaxial jacks may be used and/or the optical output may be connected. It is possible to use only one of the three outputs or use one coaxial and the optical output simultaneously. A front-panel SIGNAL LED illuminates when an input signal of sufficient amplitude is received to produce the correct output from the module. | Inputs (3): | 75 Ω BNC coaxial, 75 Ω phono coaxial, optical | | Input Level: | 100 mV to 2.5 V p-p (coaxial) | | Outputs (3): | 75 Ω BNC coaxial, 75 Ω phono coaxial, optical | | Output Level: | 500 mV p-p (coaxial) | | Frequency Range: | 28 kHz to 48 kHz | | Indicator (1): | Signal present LED | | Jitter: | < 200 pS (input signal 200 mV p-p or greater),
< 1 nS (input signal 100 mV p-p) | | Power Requirement: | GROUND-REFERENCED, 24 Vdc @ 80 mA Note: May operate from 12 Vdc in standalone installations | | Dimensions: | Height: 1.34 in. 3.40 cm | | Width: 3.25 in. 8.26 cm | | Length: 2.82 in. 7.16 cm | | Ambient Operating Environment: | -10° C to 55° C |
|
Products 
