Australian Monitor 250 Watt Rackmount Amplifier - AMIS250P
Description
The AMIS250P is a 250 watt power amplifier with outputs for 4 ohms and 70 volt line. It may be desk or rack mounted. The AMIS250P features a flat screwdriver accessible gain control on the rear panel.
Inputs
The AMIS250P features one signal input. The unit has industry standard 3 pin XLR microphone sockets. Two line level sockets are provided for bridged in/out connection.
Outputs
The AMIS250P features 70 volt and 4 ohm isolated transformer outputs.
Protection
Internal current limiting protects the amplifier from both overload and overdrive conditions. The AMIS250P also features protection in the form of excess temperature auto cut out. A built-in auto temperature sensing fan will turn on at a factory default level but in most situations, will never be required. Australian Monitor Installation Series amplifiers feature a protection network that provides greater stability and performance. Our amplifiers are recognized worldwide for their reliability and this is due to the extensive levels of current limiting which protect the amplifiers from both overload and overdrive conditions.
Features
- Balanced XLR line level input with parallel output
- Present LED
- Rear panel level control
- Temperature Sensing Fan Cooling
- Auto limiting protection
- 100V, 70V and 8 ohm outputs
- 2RU
- 240VAC/24VDC operation
SPECIFICATIONS
Power Output
250 Watts RMS
Maximum Load
20 Ohms @ 70 Volts
Power Bandwidth
60Hz - 17kHz (- 3dB)
Frequency Response
60Hz - 23kHz (- 3dB)
Distortion
0.5% @ 1 kHz rated power (THD)
Signal To Noise Ratio 8
80dB
Input Sensitivity
700mV Outputs 70V,
4 Ohm
Controls
One gain control on rear of the unit via flathead screwdriver control
Indicators
Power “on” and
“Protect” LED
Power Source
120VAC 60Hz 3 pin IEC connector; 24VDC
Power Consumption
400 Watts
Protection
Current Limiter protection, plus AC and DC fuses
Dimensions HWD
3.5" x 19" x 13"
Weight
33.1lb
Rack Mounting
Standard
|
Products