D10CEA
SDI to Analog Audio/Video
The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Features
- Excellent Quality 10-bit Universal D/A Conversion
- Full 10-bit Data Path, 4x Oversampling
- SDI Input, 2 Re-Clocked, Loop-Thru SDI Outputs
- Simultaneous Component and Composite Analog Outputs
- YPbPr, Betacam, or RGB Component Formats
- NTSC or PAL Composite Formats
- Precision PLL Jitter Filter For Stable Composite Outputs
- Digital Noise Reduction
- Low Cost
Specifications
Inputs
Outputs
- Simultaneous Component and Composite Output
- YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL,
- YC (S-Video), 3x BNC
- NTSC/PAL or Sync, 1x BNC
- Re-Clocked, Loop-Thru SDI, 2x BNC
D/A Converters
- 10-bit, 4x Oversampling
- Clock Jitter Filtering to 2.5Hz
Frequency Response
- Y +/- .15dB to 5.5Mhz
- C +/- .15dB to 2.5Mhz (Component)
- C +/- .15dB to 1.3Mhz (Composite)
- Less Than .5% K Factor (2T)
User Controls
- External Dipswitch
- Video Format
- Pedestal
- Narrow/Wide Blanking
- Audio Group 1 - 4
- Digital Noise Reduction
Power
- 5VDC Regulated, 4 Watts, Power Supply Required (sold separately)
Size
- 5.8" x 3.1" x 1" (147 x 79 x 25mm)
|
Products 
