LYNX yellobrik: Bidirectional Fiber to Ethernet Transceiver 10K Pair

LYNX yellobrik: Bidirectional Fiber to Ethernet Transceiver 10K Pair - OBD-1510 E

Ethernet to Fiber Bidirectional Transceivers (switch)

• Bidirectional send and receive over single fiber link
• Supports standard Ethernet inputs up to 1Gbit
• Closed loop WDM fiber system
• Auto (10/100/1000) electrical port speed detection
• Manually force 10Mbit electrical speed
• Fiber connection speed always 1Gbit
• Auto or manual electrical crossover selection
• Distances up to 10km (6.2 miles) over SMF fiber
• Supplied as matched pair (A and B version)

The OBD 1510 E is a matched pair of compact Ethernet switches designed to extend the reach of electrical Ethernet signals over long distances. The two switches are linked via single bidirectional fiber link which operates at a constant 1Ggit speed. This pair of modules uses WDM fiber technology in a closed loop arrangement and essentially functions as an Ethernet extender solution. The fiber link supports distances up to 10Km and provides a single, high speed 1Gbit error-free optical connection between the two locations.

Each OBD 1510 E module has two standard RJ45 electrical Ethernet ports and the complete system functions as a 4 port Ethernet switch, providing two standard RJ45 Ethernet ports at each location bridged with fiber. For legacy systems, each electrical Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10Mbit. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch.

Technical Specifications

Ethernet

2 x Ethernet ports, RJ45 Connectors.

10 BaseT UTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)

100 BaseT XUTP category 5 cable up to 328ft/100m (2 pairs)

1000 BaseT XUTP category 5 cable up to 328ft/100m (4 pairs)

Auto detect bit rate (10/100/1000), or force to 10Mbit for

each port (selectable)

Automatic crossover detection or force manually for

each port (selectable)

Port speed / activity LED indication (next to Ethernet port)

Fiber Optic

1 x fiber optic I/O port (bidirectional)

Simplex (single mode) using LC/PC connection

WDM using 1310nm and 1550nm wavelengths

Optical budget = 18dB

Fiber TX active and RX active LEDs on side of module

Max. distance 10km (6.2 miles - Singlemode)

Power

+12VDC power supply (included)

Supports external power input from 9 - 14 VDC

Power LED on side of module

Size

105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)

Model #

OBD 1510 E

Includes

2 x OBD 1510 E modules (Type A and Type B), 2 x 12V

DC power supplies, wall mounting brackets and plastic

transport case